Get the firmware for your exact model from the maker's own support page, put the router on a LAN cable, and run the update from the admin menu without cutting power.
Why the update matters
Firmware is the software running inside the router, and an update carries the fixes the maker has issued since the box left the factory. Linksys calls firmware updates bug fixes, and says a later build fixes issues you may encounter.
TP-Link warns that using the wrong firmware file can damage the device and void the warranty.
Check the model and version first
Read the exact model and the hardware version off the label before you open a browser. TP-Link asks you to verify the hardware version and to download from the official site for your region, and Linksys points to its own support-site file.
Back the configuration up before you write anything. If the flash fails and a reset follows, the backup is what returns the SSID, the key and the port rules without rebuilding them.
The download arrives as an archive to unpack: Linksys and ASUS ship a .zip, TP-Link a .zip with the BIN inside, D-Link a bare .bin. TP-Link also documents a phone update through its Tether app.
Update over a cable
The LAN port is the one to use. Plug an Ethernet cable from the computer into a LAN port on the back panel.
D-Link says the upgrade should only be done over a wired connection, and TP-Link tells you not to upgrade over wireless unless the router has no LAN/Ethernet port.
Automatic update
Several makers do the checking for you. The NETGEAR Nighthawk app can carry an update on routers that support it; TP-Link Cloud models show an Update icon and a Tether app entry, and ASUS has Auto Firmware Upgrade under Administration > Firmware Upgrade.
ASUS also asks you to set a preferred upgrade time, suggesting one when you are not using the network.
Update through the vendor's menu
Every path below sits behind the admin login, so log in at the maker's default address first; the router login page has the credentials.
The power cable is the thing you leave alone. Linksys prints a plain instruction not to power off during the update; the reset pinhole is for the recovery, not for the middle of the flash.
| Vendor | Menu path | Rule printed |
|---|---|---|
| NETGEAR Nighthawk | Nighthawk app, or routerlogin.net > ADVANCED > Administration (or Settings > Administration) > Firmware Update (or Router Update) > Check > Yes > Upgrade | Menu names differ between firmware generations; not every router takes the app |
| TP-Link Wi-Fi routers | tplinkwifi.net > Advanced > System > Firmware Upgrade > Browse; Cloud models: Update icon or Tether app | Verify hardware version and regional firmware; no wireless upgrade unless no Ethernet port |
| Linksys | myrouter.local or https://192.168.1.1 > Connectivity > Firmware Update > Basic tab > Choose File > Start > Yes | Support-site file for the exact model; unzip first; do not power off |
| ASUS | Administration > Firmware Upgrade > Auto Firmware Upgrade | Exact model, unzipped; factory reset and fresh setup recommended afterwards |
| D-Link DIR series | dlinkrouter.local or 192.168.0.1 > Maintenance > Firmware Update > Browse > Upload > Continue | Wired connection only; download the latest firmware for your DIR Series router |
| Verizon Router CR1000A | No user procedure printed; firmware arrives by FOTA | Fast-blinking white LED marks the update; no check-for-updates menu printed |
After the reboot
The router restarts by itself when the write finishes and the admin page disappears for a while. Wait it out, then log back in and confirm the version string has changed. A changed version string is the proof the flash took.
Whether the SSID and key survive depends on the maker: TP-Link warns that a release note calling for a reset wipes them, and ASUS recommends a factory reset after every update. Restore the backup if a field came back empty.
When the update fails
Leave the browser window open and the power on. If the progress bar stalls, TP-Link says wait up to five minutes; a dropped flash needs the pinhole afterwards.
If the page has gone for good, power-cycle once, rejoin on a cable and try again. If it still fails, TP-Link says to refresh the page and retry, or try another browser, and to check the download is an extracted .bin.
On the Verizon Router the white LED fast-blinks while the update runs, so that blink is the update working, not failing. When nothing brings the page back, hold the reset pinhole as the reset procedure describes, restore the backup, then reinstall the firmware.
Questions
Do routers automatically update firmware?
Some do. NETGEAR offers an app path, TP-Link Cloud models and ASUS have an automatic setting, and the Verizon Router updates by FOTA with no user step printed. Others wait for you to press Check.
How do I know if my router needs a firmware update?
Compare the version on the admin page with the file the maker lists for the exact model. If the support page shows a later version, the router needs it.
Is it necessary to update router firmware?
Yes when a later build exists for the model. Linksys puts it plainly: keeping the firmware updated is important because it fixes issues you may encounter.