Skip to main content

Port labels, addresses and setup pages from vendor documentation · checked Nov 2026 · Methodology

How to change your Wi-Fi password

ResetWANLAN 1LAN 2LAN 3LAN 4PowerSSID ROUTER-4B21
Setup 192.168.0.1
Password printed below
Wi-Fi
The Wi-Fi password is a radio setting; the admin password guards the page that holds it.

By RouterPanel Editorial · Updated

Short answer

Open the router's admin page at its local address, sign in, open the wireless security screen for each band, and set your own WPA2 or WPA3 passphrase. Every saved device then needs the new key once.

Open the router's admin page at its local address, sign in, open the wireless security screen for each band, and set a passphrase only you know. The save takes effect at once and drops every device, so have the new key ready before you press it.

Log in to the router first

The admin page is served by the router itself, so the first move is a connection to the router, not to the internet. The sure path is a cable: plug an Ethernet cable into a LAN port on the back panel, not the WAN port, which faces the modem. A computer wired that way keeps a stable link through the whole job and comes back on its own once the change is saved.

Wi-Fi works too. Join the SSID on the label, then open the admin page in the browser. The label on the bottom or the back carries the network name and the admin password, and the admin password is the one to copy, not the Wi-Fi key next to it. A computer with no Ethernet port needs a USB adapter, or a phone does the whole job over Wi-Fi.

On the back panel the LAN ports sit together in a row, usually numbered, and the WAN port stands apart, often coloured and labelled Internet or WAN. Plugging the computer into the WAN port gives no admin page, because that port faces the modem. The Reset button sits on the back panel and is pressed with a paper clip; it stays untouched until the last section.

  1. Connect the computer to a LAN port, or join the router's Wi-Fi.
  2. Open a browser and type the router's local address in the address bar.
  3. If the browser warns that the connection is not private, open Advanced and choose Proceed.
  4. Sign in with the credentials printed on the router label, or with the ones you set at first setup.

Every maker publishes its own default address, and the address is only a default: an earlier owner, an installer or you can change it. The table lists what the maker documents, with the limit the maker states.

Default admin address and login by brand, as documented by each maker and checked on 18 November 2026
BrandWireless security menuDefault admin addressDefault loginLimit stated by the maker
NETGEARWireless; Settings > Wireless Setup on Nighthawk Pro Gaming routersrouterlogin.net or 192.168.1.1User name admin; password set at setup; admin / password after a factory resetThe per-model default can be 192.168.0.1, and the address is changeable
TP-LinkWireless > Wireless Settings or Basic > Wireless; Wireless Security on some older modelstplinkwifi.net or 192.168.0.1Newer models set a custom password on first login; older models use admin / adminModel dependent; credentials are on the back or bottom label
LinksysWireless > Wireless Securitymyrouter.local, linksysxxxxx.local or https://192.168.1.1Password adminA changed password needs a reset; the address is changeable
ASUSWireless > General on older firmware; Network > Main network profile on newer firmwareThe router LAN IP, for example http://192.168.50.1, or http://www.asusrouter.comNo factory password on ASUSWRT: you set the account and password on first login; some models use admin / adminThe example IP varies by model and the address can change
D-Link DIR seriesClick Configure, choose AUTO-WPA/WPA2, then type in the Network Key fielddlinkrouter.local or 192.168.0.1User name Admin; the password field is blankA factory reset restores the blank password; the address is changeable
Verizon Router CR1000AWi-Fi > Primary Networkmynetworksettings.com or 192.168.1.1Network Settings password on the rear label; no user name stepA certificate warning appears; choose Proceed
Verizon Internet GatewayWi-Fi then Primary Networkmynetworksettings.com; https://192.168.1.1 on WNC-CR200A and ARC-XCI55AX; https://192.168.0.1 on ASK-NCQ1338 and ASK-NCQ1338FAAdmin password on the bottom labelThe address differs by model and the warning is bypassed through Advanced and Proceed

An address from the table that refuses to open is not a dead end. The router's real gateway address can be read on the computer or phone, as described in how to log in to your router.

Find the wireless security section

The teal controls live under a wireless menu, and the exact name differs by maker. On NETGEAR the entry is Wireless, or Settings then Wireless Setup on Nighthawk Pro Gaming routers. On TP-Link the path varies: Wireless then Wireless Settings, or Basic then Wireless, with Wireless Security on some older models. Linksys puts it under Wireless then Wireless Security, ASUS under Wireless then General on older firmware, and D-Link behind Configure on the router home page. Verizon routers keep it under Wi-Fi then Primary Network.

An SSID is a network name and the passphrase is the key to it. Pick the SSID from the list so the change lands on the network you mean, not on a guest network or a neighbour's entry that the router sees.

Open the entry that matches your main SSID. The screen carries a security mode dropdown and one or two password fields, usually named Password, and WPA-PSK Key on some ASUS screens. Leave the SSID itself alone unless you want a new name as well.

Firmware splits two ways here. On a newer router the SSID list is a table of radios, and each row opens its own page with a security mode and a key. On an older router the SSID, the mode and the key all sit on one long page, and the save button is at the bottom. Read the whole screen before you type, so nothing else is overwritten by accident.

A guest SSID has its own security entry and its own key. Changing the main network leaves the guest key as it was, which is useful, and the two should not share a passphrase. If the wireless menu has no Security item at all, the router ties the mode and key to the SSID edit page instead, and the fields appear once you choose to edit the network.

Set a password that holds

A home network has a floor: WPA2-Personal. WPA2 remains mandatory for every Wi-Fi CERTIFIED device as of the Wi-Fi Alliance WPA3 announcement of 25 June 2018, and every Wi-Fi device has shipped with WPA2 security since 2006, so no router made in the last two decades lacks it.

WPA3-Personal is the better setting where the router offers it. WPA3 is mandatory for Wi-Fi CERTIFIED devices as of the Alliance security page retrieved on 18 November 2026, it requires Protected Management Frames, and it disallows the outdated legacy protocols. ASUS calls WPA3 a new generation of encryption that can greatly enhance connection security, and warns that old devices may not connect to WPA3-Personal or WPA2/WPA3-Personal; it sends legacy devices to a separate IoT network.

Type a passphrase long enough that a guessing run stalls: several words strung together beat a short scramble of letters and digits that you cannot type twice. Avoid the SSID itself, the street name and the maker's default. Apply or Save, and let the router finish writing the setting before you move to the second band.

The passphrase field takes a long key: ASUS allows 8 to 63 characters and Verizon 8-63 alphanumeric characters, so a phrase works. Four unrelated words with a number between them are easy to type on a phone and hard to guess. Keep the length under control: some television remotes stop accepting input well before the field's limit, so a very long key can become painful to enter on anything without a full keyboard.

Do not pick WEP when the router offers it. WEP is the oldest Wi-Fi security protocol and is now considered obsolete, though an older device may still force it; open means no key at all, though Wi-Fi Enhanced Open adds encryption on top of that. The Alliance describes traditional open networks as ones "with no protections at all". If a legacy gadget only supports WEP, put it on the guest network instead. ASUS makes the same split for IoT kit: cameras, plugs, sensors and thermostats may not be compatible with the latest standards, so they get a dedicated network while the main one keeps current protocols.

Write the new passphrase down while the save runs, or store it in a password manager that both phones can reach. A key that exists only in your head is a key you will mistype at the television.

Change it from a phone

A phone on the router's Wi-Fi can open the same page in its browser, and the job is short. Type the address from the table in the browser, sign in, and follow the same wireless entry to the security screen.

  1. Join the router's Wi-Fi and open the browser.
  2. Type the router's local address and sign in.
  3. Open the wireless security entry for the SSID in use.
  4. Enter the new passphrase, Save, then rejoin the network with the new key.

The phone sits on the network being changed, so it drops the moment the save lands. That is expected. The manufacturer app is the other route from a phone, and an app that manages the router usually writes the same setting without a browser.

Do not close the tab until the router answers. A save over Wi-Fi can time out if the phone is far from the router, and then it is unclear whether the new key was written.

Do the phone job next to the router, and turn the phone's screen timeout up for the time it takes. If the save page hangs, wait a moment before reloading, because a router that is already writing the new key will drop a second request. When the screen comes back, open the Wi-Fi list and rejoin with the new passphrase.

If the router has an app, the app is the gentler route from a phone. The app keeps the session after the drop and often walks the reconnection itself. Where the app offers a QR code for a guest network, that code is separate from the main key and does not change with it.

2.4 and 5 GHz are separate entries

Many routers run two radios and hold a separate SSID and passphrase for each. The 2.4 GHz entry is the one plugs and cameras use; the 5 GHz entry is the one phones and televisions prefer nearby. Both entries carry the same screen, so change each one in turn and save both.

Some routers tie the two bands to a single name and a single passphrase. Where the screen shows one passphrase only, one change covers both radios. Where it shows two, a missed second entry leaves half the house on the old key.

Changing both to the same passphrase keeps the reconnection simple, though the two networks stay distinct. Changing them to different keys is also fine and can be worth it where an old device cannot handle the 5 GHz band at all. Either way, save the 2.4 GHz entry as carefully as the other one, because the plugs and the doorbell are the devices that lose their pairing when the key moves.

A router that lists a 6 GHz entry follows the same rule. Every entry with a key gets the new one, and the passphrase is entered once per band on each device.

The trade-off between the bands is worth reading before you pick names, in 2.4 GHz vs 5 GHz.

Reconnect every device

Every wireless client that saved the old key stays locked out until it gets the new one. The change is not partial and it does not wear off, so plan the reconnection before the save, not after it.

  • Phone and laptop: open the Wi-Fi list, choose the SSID, and type the new passphrase when prompted. Delete the old entry first if the device keeps retrying it.
  • Smart plug and camera: hold the key in a pairing record and need the pairing step run again from their app.
  • Television, streaming stick and games console: open the network settings, choose the SSID and enter the new key with the remote or a controller.
  • Printer, thermostat and doorbell: the same re-entry applies; a device with no screen is usually set up again from its app.

A Wi-Fi QR code stuck to the fridge still encodes the old key. Print a new one or rewrite the card when the change is done. Devices that joined the guest network keep working: they run on a different password, so a main-key change never disconnects them; a guest Wi-Fi network is the better home for visitors for exactly that reason.

Order the work so the device you are reading on is not first. The wired computer stays connected throughout, which makes it the natural place to run the change. Rejoin the household phones before the fixed devices, because a phone is also the tool for the app that pairs a plug or a camera.

Expect a stream of reconnect prompts after the save. A device that keeps trying the old key will show it as saved and fail; tell the device to forget the network, then join it fresh. Devices on a schedule, such as a thermostat, may wait for their next wake window before they accept the new key, so give them a power cycle rather than assuming the change failed.

If a device refuses the new key, shorten the passphrase to plain letters and digits and enter it again. Some appliance apps mangle spaces and symbols, and the shorter key is still far better than the old default.

The full list of what drops and when is in does changing the Wi-Fi password disconnect devices.

What to do when the admin page will not load

Work down the chain before you reach for the Reset button, which is the red step: it wipes every setting, including the one you meant to keep.

  1. Move to a cable. A LAN port and an Ethernet cable remove Wi-Fi from the path and often clear the fault at once.
  2. Check the address. Retype the one on the label, and remember that NETGEAR models can default to 192.168.0.1, while TP-Link routers can answer on 192.168.1.1.
  3. Go past the certificate warning with Advanced and Proceed. Verizon routers show it by design on first access.
  4. Turn off mobile data on the phone, so the browser cannot prefer the cellular route over the router.
  5. Try the other address from the same maker's row in the table before assuming the router is broken.

When the cable, both addresses and the warning have all failed, the Reset button is the next step. Hold it for seven seconds with a paper clip, then read the fresh label credentials and set the network up again. The reset erases the new passphrase along with everything else, so note the old one before you start. What a router is and why it holds these settings is covered in what is a router.

An admin page that loads but rejects the password is a different fault from one that never loads. The password on the label wins only if nobody has changed it; once it is changed, a reset is the honest way back in and the label password returns. Rented gateways sometimes lock the admin page to the provider account, and then the wireless key is changed in the provider's own app or web account instead of the local page.

Certificates and stale addresses are the two failures that look dramatic and cost nothing. A warning page with an Advanced link is normal on a local device, and an address that belonged to a previous router is simply the wrong door. Neither calls for new hardware.

Questions

Can I change my WiFi password by myself?

Yes. The router's admin page is open to whoever holds the login, and the wireless security screen is a normal setting behind it. No call to the provider is needed unless the router is rented and locked by the provider.

How to change WiFi password in phone?

Join the router's Wi-Fi, open the admin address in the phone browser, sign in and open the wireless security entry. Save the new passphrase, then rejoin the network. The phone drops at the save and asks for the new key.

Does changing my WiFi password kick everyone off?

Yes, at the moment of the save. Every saved device is holding the old key, so each one stays off until the new key is entered or the device is paired again.

A shorter walk through the same screens is in how to change your home Wi-Fi password.

Sources

  1. kb.netgear.com: How do I log in to my NETGEAR router · checked Nov 19, 2026
  2. kb.netgear.com: How do I change my NETGEAR router s WiFi password or network name SSID · checked Nov 19, 2026
  3. kb.netgear.com: How do I locate my router s IP address · checked Nov 19, 2026
  4. kb.netgear.com: How do I perform a factory reset on my NETGEAR router · checked Nov 19, 2026
  5. tp-link.com: 87 · checked Nov 19, 2026
  6. tp-link.com: 399 · checked Nov 19, 2026
  7. tp-link.com: 1170 · checked Nov 19, 2026
  8. tp-link.com: 776 · checked Nov 19, 2026
  9. support.linksys.com: 81 en · checked Nov 19, 2026
  10. asus.com: 1005263 · checked Nov 19, 2026
  11. asus.com: 1011433 · checked Nov 19, 2026
  12. asus.com: 1053540 · checked Nov 19, 2026
  13. dlink.com: how do i change the wifi password on my router · checked Nov 19, 2026
  14. dlink.com: how do i enable wep encryption so my older devices can connect · checked Nov 19, 2026
  15. verizon.com: knowledge base 239713 · checked Nov 19, 2026
  16. verizon.com: knowledge base 239858 · checked Nov 19, 2026
  17. verizon.com: knowledge base 301456 · checked Nov 19, 2026
  18. verizon.com: knowledge base 301459 · checked Nov 19, 2026
  19. asus.com: 1030644 · checked Nov 19, 2026
  20. wi-fi.org: security · checked Nov 19, 2026
  21. wi-fi.org: wi fi alliance introduces wi fi certified wpa3 security · checked Nov 19, 2026
  22. wi-fi.org: Wi Fi_CERTIFIED_WPA3_Technology_Overview_202101 · checked Nov 19, 2026

RouterPanel. "How to change your Wi-Fi password." Updated Nov 19, 2026. https://howtosetuparouter.com/change-wifi-password/