Skip to main content

Port labels, addresses and setup pages from vendor documentation · checked Nov 2026 · Methodology

Where is my router located?

ResetWANLAN 1LAN 2LAN 3LAN 4PowerSSID ROUTER-4B21
Setup 192.168.0.1
Password printed below
Wi-Fi
The router sits where the modem cable and the power are.

By RouterPanel Editorial · Updated

Short answer

Start where the line enters the home: the coax or fibre socket at the entry point. Follow the first cable inward, past the modem if there is one. The router is the antennaed box with a row of LAN ports at its end.

Start where the line enters the home: the coax or fibre socket at the entry point. Follow the first cable inward, past the modem if there is one. The router is the antennaed box with a row of LAN ports at its end.

Start at the entry point

The fibre is routed in from outside, through an existing entry point or a new hole in the exterior wall. Look for the coax socket or the fibre box, then follow the first cable that leaves it.

The first box on the cable is the modem and the second is the router, joined to it by an Ethernet patch cable into the WAN port. A combo unit does both jobs in one case, so the box at the socket may already be the router.

Check the obvious surfaces without drilling again: the shelves and tables near the socket, and whether a box has been tucked into a cabinet. A router sits in open air, on a shelf or table, not inside a cabinet.

In a flat, follow the same order: socket, cable, then boxes.

What the router looks like

Amber: the ports. A router has a WAN port, usually labelled "Internet", and a block of LAN ports beside it.

Teal: the radios. Antennas stand up from the box and can be angled; some models have fixed ones. The lights come on once it has power.

The label on the bottom prints the network name and the default Wi-Fi password. On TP-Link routers the admin page is at tplinkwifi.net or 192.168.0.1, typed into a browser; log in to your router takes it on.

Boxes it is not

Three other boxes get mistaken for it.

  • The modem: a coax or fibre connection and one Ethernet port on older units. It ends at the line, and the router sits behind it.
  • The set-top box: an HDMI cable to the TV and a remote; it can also take an Ethernet cable for a wired link. It has no LAN block.
  • The fibre ONT: a wall-mounted box at the socket, with a fibre lead in and one Ethernet port out. The router is the next box on that cable.

The LAN block and the antennas mark a router out, as what a router does sets out. If the two main boxes still look alike, modem versus router sets out what each one does.

Once you have found it

A found box is not automatically in a usable place. Some makers print a height or a clearance, and where they do the figures differ enough to take each one separately.

Printed placement height and wall clearance, by maker, checked 18 November 2026; the last column gives the scope of each placement rule
MakerPrinted heightPrinted clearanceApplies to
NETGEAROff the floor, on a shelf or table; no figureNot in a corner or against a wall; no figureSingle-router home
TP-Link, FAQ 455About 1 to 1.5 ftNot inside cabinets or behind wallsSingle-floor placement; vendor recommendation, not a measurement
TP-Link, blog 2460At least 1 m off the floorAt least 20 to 30 cm on all sidesHomes with concrete walls; written for Philippine construction
ASUSElevated and/or in an open area; no figureOpen area, clear of obstaclesASUS range extenders
LinksysNot on the floor; the floor absorbs the signalCentral and visible, in an open space; no figureAll router placement
eeroHalfway between floor and ceiling, not on the groundNot printedeero units, which radiate along their own plane
Google Nest WifiElevated, for example on a shelfNot printedNest Wifi and Google Wifi points

Apply the maker's line. The direction is up and away from the wall; improve your Wi-Fi signal covers the radio side.

Questions

How do I tell the router from the modem?

The modem holds the coax or fibre connection and one Ethernet port; the router holds the WAN port, the LAN block and the antennas, and sits behind the modem.

Does the router have to stay where the installer put it?

No, as long as the cable still reaches and the maker's placement rules are met. The move is up and out: off the floor, out of a cabinet, away from the wall.

Sources

  1. NETGEAR — Best Wi-Fi router location · checked Nov 19, 2026
  2. TP-Link — Router antenna and placement FAQ · checked Nov 19, 2026
  3. TP-Link — How to position your router for the best Wi-Fi signal · checked Nov 19, 2026
  4. ASUS — Router and extender placement · checked Nov 19, 2026
  5. Linksys — Router placement · checked Nov 19, 2026
  6. eero — Where should I place my eeros · checked Nov 19, 2026
  7. Google — Where to place Nest Wifi · checked Nov 19, 2026
  8. NETGEAR — Connecting a cable modem and router · checked Nov 19, 2026
  9. TP-Link — Find your router Wi-Fi password (label) · checked Nov 19, 2026
  10. Openreach — Equipment in my home · checked Nov 19, 2026
  11. Xfinity — X1 power preferences (HDMI, remote) · checked Nov 19, 2026
  12. Xfinity — X1 Wireless TV Box FAQs · checked Nov 19, 2026
  13. T-Mobile — How is fiber optic internet installed · checked Nov 19, 2026

RouterPanel. "Where is my router located?." Updated Nov 19, 2026. https://howtosetuparouter.com/what-is-a-router/where-is-my-router-located/